STATION ID - 7047/3.12 9x Datakit Network FOR OFFICIAL USE ONLY This is a 9x system, restricted to authorized persons and for official 9x business only. Anyone using this system, network or data is subject to being monitored at any time for system administration and for identifying unauthorized users or system misuse. Anyone using this system expressly consents to such monitoring and is advised that any evidence of criminal activity revealed through such monitoring may be provided to law enforcement for prosecution. Some information on ROLM PhoneMail systems Written in 1996 by Substance This will try to explain to you how to use the PBX features, how to setup and takeover your own boxes, and also give a basic overview of the system. I included a log of a PM and a brief description of each command. The main menu of a PM will have these options on it, i will attempt to give a brief summary of what each command does. Some of the commands i left blank either A) I dont know what it duz or B) You can figure it out yourself. Û ActivatePM Û Turns on PhoneMail, if it was Deactivated Û AssignClasses Û Û BackupNames Û Û BackupSystem Û Backs up the PM system to floppy Û CallProcessing Û Û ClassOfService Û Û DeactivatePM Û Turns off PhoneMail, after this, PM will be BUSY Û DList Û Û Export Û Û FFormat Û Formats a floppy disk Û LogOff Û Logoff the PM system Û MonitorLogon Û Monitors Mailbox Login Attempts Û NodeParameters Û Configure PM Node Parameters, find # of PM VMB Û OCConfigAndTest Û Û OCMessageLog Û Û Profile Û Û Reports Û Gives Daily reports on PM Û RestrictionTbls Û Restrictions Û Status Û Shows Status of PM, # of users, if active, general Û SysParameters Û Shows System Parameters Û SysStatistics Û Shows System Statistics Loggin into the System: CONNECT 1200 (not all PM's are 1200, but most) (It should answer and say) PM Login> Illegal Input. (if you dont enter a valid usrname) Default Accounts (known) ( = enter) ------------------------- LOGIN: PW: SYS , SYS, TECH, POLL etc TECH , SYS, TECH, POLL etc POLL SYSADMIN or SYSADMIN There may be more defaults, im not sure. Passwords are NOT case sensative. (Once you enter the system you will know when you see this, it will vary depending on what version of PhoneMail you are on.) ROLM PhoneMail 9252 9254 Microcode Version 5.3 Copyright (C) ROLM Systems 1992 All Rights Reserved. ÿÿÿ PhoneMail is active with 4 Channels [The basic main SA menu looks like this] (SA = System Administrative) ] [It will vary depending on what accound you logged in as ] Thu Jul 13, 1995 10:32 PM Specify a function - ActivatePM AssignClasses BackupNames BackupSystem CallProcessing ClassOfService DeactivatePM DList Export FFormat LogOff MonitorLogon NodeParameters OCConfigAndTest OCMessageLog Profile Reports RestrictionTbls Status SysParameters SysStatistics ------------------------------------------------------------------------------ Function: SysStatistics (System Statistics) Thu Jul 13, 1995 10:33 PM Action: ? Specify an action - Clear List (*I would not advise clearing the buffer it might notify the admin*) Action: List (This list is alot longer then i printed, sometimes) Disk Full Count 0 Disk Full Hours 0 Disk 90% Full Count 0 Disk 90% Full Hours 0 etc, etc, etc Im not exactly positive what all of the System Statistics are, but you can guess on some of them. Function: SysParameters Thu Jul 13, 1995 10:34 PM Action: ? Specify an action - List Modify Action: List Passwords Required ? TRUE (Ask for passwords?) Prompt Repetitions 2 (How many times should PM repeat prompt) Max PhoneMail ML 300 StopPrompt TimeOut 3 Re-Prompt TimeOut 5 PhoneMail Rev Number 0 Conn Time Unit Price 1 Min Conn Time Bill 1 Outcall Unit Price 100 Min Outcall Bill 100 ANR Frequency 10 ANR Retries 2 Msg Sent Unit Price 1 Min Msg Sent Bill 1 Msg Len Unit Price 1 Min Msg Length Bill 1 Avg Retn Unit Price 1 Min Avg Retn Bill 1 Avg Len Unit Price 1 Min Avg Length Bill 1 SA Console Password ########## (System Admin's Console Password!) 1st Level Field PW ########## (unfortunatly they are shadowed) 2nd Level Field PW ########## Xfer To Extension ? TRUE Xfer To Extn Prefix Return To Operator ? TRUE Name Entry Allowed ? TRUE Extn Entry Allowed ? TRUE Enable Outcalling ? FALSE Play Recorded Names? TRUE System Wide Vol Ctrl FALSE Min SA Password Len 8 Last SA Pswd Change Thu Dec 31, 1992 11:35 AM (hahah) Extern Access Prefix 9 24Hour Clock Format? FALSE Alt Date Format? FALSE Area Code 518 Silence Tmout (secs) 10 Disk Full Thresh (%) 90 Return to home state TRUE Check Sub Password TRUE Transfer Restriction FALSE Notice the System Administrators password is shadowed, unfortunatly. To hack Admins box you must change his password, and hope he doesnt notice :) Or you can just setup your own box on the system and give yourself admin access. So it is just best to leave the admins box alone, it will lessen your chances of being noticed and also make your boxes last *ALOT* longer. Note on Outcalling (mentioned above)  Outcalling is *NoT* what you think, it is not a way to make free calls, IF outcalling is enabled (default is not enabled), it is simply a way to have PM call YOU at a specific location at a specific time and give you your messages. ------------------------------------------------------------------------------ Function: Status Thu Jul 13, 1995 10:35 PM Action: List Percent of Disk Used 40 Number Busy Channels 0 (incoming) 0 (outcalling) 0 (network) Number Down Channels 0 Number Disks Mounted 1 Number of Users 50 PhoneMail Active? TRUE Prompt Language English ------------------------------------------------------------------------------ Function: NodeParameters Thu Jul 13, 1995 10:35 PM Action: List Forwarded Ext Num 6195 - Extension and last 4 digits of VMB Direct Ext Num 6197 Guest Ext Num 6196 Guest Acc if Unknown FALSE General Mailbox ? FALSE General Mailbox Num Sub Redirect Mode 0 Internode Xfer Num Host Link Node UNASSIGNED Host System ID Host UserId Host Link ID Max Number Of DLists 3000 SA Access Extension SA Access Password ########## (shadowed) PDL Reserved Extn 1 Pager Display Number xxx6195 Outcall Max Channels 1 PhoneMail Operator 6000 Voice Msg Priority ? TRUE Min Free Chan - Prty 0 CP Fixed Extn Length 4 CP Re-Prompt TimeOut 5 CP Prompt Repetition 2 CP PhoneMail Oper. 6000 ANI Enabled ? FALSE DLCheck Time Begun Wed Jun 28, 1995 9:15 AM DLCheck Finish Time Wed Jun 28, 1995 9:15 AM DLCheck Throttle Val 1 Volume level of node 3 If you want the dialup for the PhoneMail system, look under this option, to find the #, look at 'Direct Ext Num: 6197' Remember what you dialed for this Rolm control computer? Well, take that prefix and add on the 4 digits after the Direct Ext Num, so it could be 445-6197, etc. To be xfered to the operator you can see it is extension 6000, i wouldnt advise taking over this box, for obvious reasons. As you can see PM's have ANi, dont enable this unless your a total lamer. (ANi = Automatic # identification, in other words, a trace) ------------------------------------------------------------------------------ Function: RestrictionTbls Thu Jul 13, 1995 10:38 PM Dial Restriction Table Edit 1. Add Table 2. Modify Table 3. Delete Table 4. List Table 5. Test Table 9. Exit ------------------------------------------------------------------------------ Function: AssignClasses Thu Jul 13, 1995 10:39 PM AssignClasses Version 1.0 <..> <> Total Users Total Users Total Users This Site With New COS Without COS 48 0 0 ------------------------------------------------------------------------------ Returning to the main System Administration menu (this could take up to 5 minutes) ... (dont ask me why it says it says it takes 5 minutes, it takes about 5 seconds on this particular system) ------------------------------------------------------------------------------ Function: DList Thu Jul 13, 1995 10:40 PM Action: List DList Number: Cannot find this form. ------------------------------------------------------------------------------- Function: OCConfigAndTest Thu Jul 13, 1995 10:41 PM Obtaining a channel...Channel 2 Fetching DTMF Prompts...OK Closing channel...OK Outcalling must be enabled from System Parameters before using this utility. Returning to the main System Administration menu (this could take up to 5 minutes) ... ------------------------------------------------------------------------------- Function: SysParameter Thu Jul 13, 1995 10:42 PM Specify an action - List Modify Action: Modify Passwords Required ?: (Previous = TRUE): (Use passwords on boxes?) Prompt Repetitions : (Previous = 2): 4 (# of X's to repeat prompts) Max PhoneMail ML : (Previous = 300): 350 StopPrompt TimeOut : (Previous = 3): 10 Re-Prompt TimeOut : (Previous = 5): 7 Conn Time Unit Price: (Previous = 1): (credits charged) Min Conn Time Bill : (Previous = 1): Outcall Unit Price : (Previous = 100): 0 (credits for using outcall) Min Outcall Bill : (Previous = 100): 0 (Automatic # Recall) ANR Frequency : (Previous = 10): ANR Retries : (Previous = 2): Msg Sent Unit Price : (Previous = 1): Min Msg Sent Bill : (Previous = 1): Msg Len Unit Price : (Previous = 1): Min Msg Length Bill : (Previous = 1): Avg Retn Unit Price : (Previous = 1): Min Avg Retn Bill : (Previous = 1): Avg Len Unit Price : (Previous = 1): Min Avg Length Bill : (Previous = 1): SA Console Password : (Previous = #): (System Admin Console PW) 1st Level Field PW : (Previous = #): 2nd Level Field PW : (Previous = ##########): Xfer To Extension ? : (Previous = TRUE): Xfer To Extn Prefix : (Previous = 0000): Return To Operator ?: (Previous = TRUE): Name Entry Allowed ?: (Previous = TRUE): Extn Entry Allowed ?: (Previous = TRUE): Enable Outcalling ? : (Previous = FALSE): Play Recorded Names?: (Previous = TRUE): System Wide Vol Ctrl: (Previous = FALSE): Min SA Password Len : (Previous = 8): Extern Access Prefix: (Previous = 9): 24Hour Clock Format?: (Previous = FALSE): Alt Date Format? : (Previous = FALSE): Area Code : (Previous = 518): (Area code PM is located in) Silence Tmout (secs): (Previous = 10): Disk Full Thresh (%): (Previous = 90): Return to home state: (Previous = TRUE): Check Sub Password : (Previous = TRUE): Transfer Restriction: (Previous = FALSE): As you can see SysParameter is the main configuration of the Rolm Phonemail system. With this cmd you can Chage SA passwords, and basically configure the entire Voice mail box system to their prefrence. PM is a very configurable VMB system. Not many VMB systems let you change the amount of times it should repeat prompts? ------------------------------------------------------------------------------ Function: MonitorLogon Thu Jul 13, 1995 11:34 PM Start monitoring user access attempts Press to exit monitor mode... Exit monitor mode. This option when it is waiting informs the administrator of all logins and login attempts on the system. It does not display passwords or any other important info. ------------------------------------------------------------------------------ Function: Export Thu Jul 13, 1995 11:36 PM Export Data Utility Version 1.0 Querying Nodes. Node #1 has responded. Destination ? Response required Options are: Diskette FileTransfer Destination ? ; Export exiting...done. Please enter valid password: Invalid password. Unknown... (too bad i dont have a manual :(). I think it could possibly be where it writes the log file to disk.. not sure tho. ------------------------------------------------------------------------------ Function: Logout Thu Jul 13, 1995 10:45 PM Logs the user off the PM system ------------------------------------------------------------------------------ Function: ClassOfService Thu Jul 13, 1995 10:54 PM Action: Add Class Number : 1234 Invalid COS number Class Number : 1 Class Name : (Default = ): Max Number Msgs : (Default = 10): Max Future Dlv Msgs : (Default = 5): Max Msg Length : (Default = 200): Max Number Greetings: (Default = 1): Int/External Pair? : (Default = TRUE): Max Greeting Length : (Default = 200): Sub Recorded Names? : (Default = TRUE): Min Sub Password Len: (Default = 0): Max Access Attempts : (Default = 5): Attempt Threshold : (Default = 0): Send Broadcast? : (Default = FALSE): Receive Broadcast? : (Default = TRUE): Max Num PDLs Allowed: (Default = 5): LDN Exped DL Enable : (Default = FALSE): LDN Normal DL Enable: (Default = TRUE): HostLink Subscriber?: (Default = FALSE): Enable Outcalling? : (Default = FALSE): TRUE Xfer from Outcall? : (Default = FALSE): TRUE Restriction Table : (Default = 0): Min Outcall Freq : (Default = 0): RNA Retry Freq : (Default = 15): Busy Retry Freq : (Default = 5): Max Num RNA Retries : (Default = 3): Max Num Busy Retries: (Default = 5): Paging Lang String : (Default = 0): Pager Terminal Num : (Default = ): AMIS Intl Dlv Ena? : (Default = FALSE): AMIS Delivery Ena? : (Default = TRUE): If you wish to exit, type ";". First Field of Form: Class Name : (Previous = ): SMITH Max Number Msgs : (Previous = 10): 25 Max Future Dlv Msgs : (Previous = 5): Max Msg Length : (Previous = 200): Max Number Greetings: (Previous = 1): Int/External Pair? : (Previous = TRUE): Max Greeting Length : (Previous = 200): ; Done. Class Number : Unexpected value Class Number : Unexpected value Class Number : 0 COS already exists Please retry. Class Number : 3 Class Name : (Previous = ): ; Done. Class Number : Unexpected value Class Name : (Previous = ): Max Number Msgs : (Previous = 10): Max Future Dlv Msgs : (Previous = 5): Max Msg Length : (Previous = 200): Max Number Greetings: (Previous = 1): Int/External Pair? : (Previous = TRUE): Max Greeting Length : (Previous = 200): Sub Recorded Names? : (Previous = TRUE): Min Sub Password Len: (Previous = 0): Max Access Attempts : (Previous = 5): Attempt Threshold : (Previous = 0): Send Broadcast? : (Previous = FALSE): Receive Broadcast? : (Previous = TRUE): Max Num PDLs Allowed: (Previous = 5): LDN Exped DL Enable : (Previous = FALSE): LDN Normal DL Enable: (Previous = TRUE): HostLink Subscriber?: (Previous = FALSE): Enable Outcalling? : (Previous = FALSE): Xfer from Outcall? : (Previous = FALSE): Restriction Table : (Previous = 0): Min Outcall Freq : (Previous = 0): RNA Retry Freq : (Previous = 15): Busy Retry Freq : (Previous = 5): Max Num RNA Retries : (Previous = 3): Max Num Busy Retries: (Previous = 5): Paging Lang String : (Previous = 0): Pager Terminal Num : (Previous = ): AMIS Intl Dlv Ena? : (Previous = FALSE): AMIS Delivery Ena? : (Previous = TRUE): If you wish to exit, type ";". First Field of Form: Class Name : (Previous = ): Max Number Msgs : (Previous = 10): Max Future Dlv Msgs : (Previous = 5): ; Done. --------------------------------------------------------------------------- Function: BackupSystem Thu Jul 13, 1995 11:00 PM Beginning backup... BackupSystem Version 1.4 Your current system configuration contains: 1 Node 1 Disk The system files will be backed up to diskettes. QUIT This backup process may take 1 minutes and will require approximately 1 diskette. The system administrator must be present to facilitate this process. Begin backup to diskettes (y/n)? n Backs up the system to disk, not recomended. ------------------------------------------------------------------------------ Function: CallProcessing Thu Jul 13, 1995 11:04 PM ======== Call Processing Setup Menu ======== A - Add Call Processing Mailbox Profile L - List Call Processing Mailbox Profile M - Modify Call Processing Mailbox Profile D - Delete Call Processing Mailbox Profile S - Show Call Processing Mailbox Profiles E - Expand Call Processing Paths C - Check Call Processing Consistency R - Reports for Call Processing F - Finished (return to SA mode) Action: S Enter path to show, for all paths: Mailbox Mailbox Mailbox Greeting Messages Path Name Name Type Extn Recorded Waiting --------- ------- ------- ------- -------- -------- Collections Collections Menu Entry 7650 Yes ---- HOLIDAY HOLIDAY Listen Only Entry 5011 Yes ---- Action: ======== Call Processing Setup Menu ======== A - Add Call Processing Mailbox Profile L - List Call Processing Mailbox Profile M - Modify Call Processing Mailbox Profile D - Delete Call Processing Mailbox Profile S - Show Call Processing Mailbox Profiles E - Expand Call Processing Paths C - Check Call Processing Consistency R - Reports for Call Processing F - Finished (return to SA mode) Action: M Mailbox extn []: 7650 Mailbox extn [7650]: 7650 Path Name [Collections]: Collections Mailbox Name [Collections]: Collections Call processing mailbox type (? for help) [Menu]: ? Please enter: (LO) Listen Only (LR) Lis/Resp (M) Menu Call processing mailbox type (? for help) [Menu]: Menu Enable password [False]: False Entry point [True]: True Number of times to play greeting [1]: 2 Greeting replay time (secs) [5]: 5 Time out transfer type (? for help) [Phone Extn]: ? Please enter: (C) CallProcessing Extn (P) Phone Extn (S) Subscriber Profile (NE) Name or Extn transfer (NO) Name only transfer (EO) Extn only transfer (D) Direct Access (G) Guest Access (H) Hangup Time out transfer type (? for help) [Phone Extn]: Phone Extn Transfer extn [5135]: 5135 Min Sub Password Len [6]: 3 Max Access Attempts [3]: 3 Attempt Threshold [3]: 3 Direct access password (numeric) [######]: ###### Failed access attempt [1]: 1 Key 0 transfer type (? for help) [Unused]: ? Please enter: (C) CallProcessing Extn (P) Phone Extn (S) Subscriber Profile (NE) Name or Extn transfer (NO) Name only transfer (EO) Extn only transfer (D) Direct Access (G) Guest Access (U) Unused Key 0 transfer type (? for help) [Unused]: Unused Key 1 transfer type (? for help) [Extn only Transfer]: Extn only Transfer Confirm transfer? [True]: True Play Intro Prompt? [True]: True Key 2 transfer type (? for help) [Unused]: Unused Key 3 transfer type (? for help) [Unused]: Unused Key 4 transfer type (? for help) [Unused]: Unused Key 5 transfer type (? for help) [Unused]: Unused Key 6 transfer type (? for help) [Unused]: Unused Key 7 transfer type (? for help) [Unused]: Unused Key 8 transfer type (? for help) [Unused]: Unused Key 9 transfer type (? for help) [Unused]: Unused Mailbox extn []: Mailbox extn []: ? **** Invalid Value - Value must be all numeric. Mailbox extn []: 0 **** Invalid Value - Extension 0 is not allowed. Mailbox extn []: 6000 **** Extension: 6000 is assigned to a Subscriber. Mailbox extn []: 6001 **** Extension: 6000 is assigned to a Subscriber. Mailbox extn []: 5999 **** Mailbox extn: 5999 does not exist. Mailbox extn []: 5796 **** Mailbox extn: 5796 does not exist. Mailbox extn []: ; Action: ? ======== Call Processing Setup Menu ======== A - Add Call Processing Mailbox Profile L - List Call Processing Mailbox Profile M - Modify Call Processing Mailbox Profile D - Delete Call Processing Mailbox Profile S - Show Call Processing Mailbox Profiles E - Expand Call Processing Paths C - Check Call Processing Consistency R - Reports for Call Processing F - Finished (return to SA mode) Action: A Mailbox extn []: 1234 Path Name []: SYSTEM Mailbox Name []: SYSTEM Call processing mailbox type (? for help) [Listen Only]: ? Please enter: (LO) Listen Only (LR) Lis/Resp (M) Menu Call processing mailbox type (? for help) [Listen Only]: M Enable password [False]: False Entry point [False]: False Number of times to play greeting [2]: 1 Greeting replay time (secs) [5]: 5 Time out transfer type (? for help) [Hangup]: Hangup Play hang up prompt [True]: True Min Sub Password Len [0]: 3 Max Access Attempts [5]: 5 Attempt Threshold [0]: 0 Direct access password (numeric) [######]: ##### Key 0 transfer type (? for help) [Unused]: Unused Key 1 transfer type (? for help) [Unused]: Unused Key 2 transfer type (? for help) [Unused]: Unused Key 3 transfer type (? for help) [Unused]: Unused Key 4 transfer type (? for help) [Unused]: Unused Key 5 transfer type (? for help) [Unused]: Unused Key 6 transfer type (? for help) [Unused]: Unused Key 7 transfer type (? for help) [Unused]: Unused Key 8 transfer type (? for help) [Unused]: Unused Key 9 transfer type (? for help) [Unused]: Unused Mailbox extn []: Report Action: P Enter path to report, for all paths: Call Processing Path Activity Report. Mailbox Mailbox Num of User Default User Path Name Name Type Extn Accesses Trans Trans HUps --------- ------- ---- ------- -------- ----- ------- ---- Collections Collections Menu 7650 29477 16555 11274 1648 The preceding report spans the following time period: From: Mon Aug 1 , 1994 8 :46 a.m. To: Thu Jul 13 , 1995 11 :11 p.m. ***************************************************************************** Call Processing Path Activity Report. Mailbox Mailbox Num of User Default User Path Name Name Type Extn Accesses Trans Trans HUps --------- ------- ---- ------- -------- ----- ------- ---- HOLIDAY HOLIDAY Listen 5011 258 0 138 120 The preceding report spans the following time period: From: Mon Aug 1 , 1994 8 :46 a.m. To: Thu Jul 13 , 1995 11 :11 p.m. ***************************************************************************** Call Processing Path Activity Report. Mailbox Mailbox Num of User Default User Path Name Name Type Extn Accesses Trans Trans HUps --------- ------- ---- ------- -------- ----- ------- ---- SYSTEM SYSTEM Menu 1234 0 0 0 0 The preceding report spans the following time period: From: **** Statistics not cleared. To: Thu Jul 13 , 1995 11 :11 p.m. ***************************************************************************** Report Action: ? ======== Call Processing Report Menu ======== P - Path Activity Report R - Response Mailbox Activity Report B - Billing Information Report O - Outcalling Report A - Access by Hour Summary Report M - Clear Mailbox Statistics by Path S - Clear Summary Statistics F - Finished (return to main menu) Report Action: R Enter path to report, for all paths: Call Processing Response Mailbox Report. Mailbox Mailbox New Old Deleted Path Name Name Extn Messages Messages Messages Total --------- ------- ---- -------- -------- -------- ----- **** No such path. Report Action: B Enter path to report, for all paths: Call Processing Billing Information Report. Unit Type Price per Unit Billing Constant --------- -------------- ---------------- Connect Time Into PM 1 1 Connect Time Out of PM 0 0 Messages Sent 1 1 Message Len (min) 1 1 Avg Retention (hrs) 1 1 Call Processing Billing Information Report. Path Name Mailbox Name Extension/ Category Units Price Extended Price ------------------------------------ ----- ----- -------------- **** No such path. Report Action: ? ======== Call Processing Report Menu ======== P - Path Activity Report R - Response Mailbox Activity Report B - Billing Information Report O - Outcalling Report A - Access by Hour Summary Report M - Clear Mailbox Statistics by Path S - Clear Summary Statistics F - Finished (return to main menu) Report Action: O Enter path to report, for all paths: Call Processing Outcalling Report. Total Avg Num Num Connect Connect Mailbox Mailbox Succ UnSucc Time Time Path Name Name Extension Node Calls Calls (Min's) (Min's) --------- ------- --------- ---- ----- ----- ------- ------- **** No such path. Report Action: ======== Call Processing Report Menu ======== P - Path Activity Report R - Response Mailbox Activity Report B - Billing Information Report O - Outcalling Report A - Access by Hour Summary Report M - Clear Mailbox Statistics by Path S - Clear Summary Statistics F - Finished (return to main menu) Report Action: A Access by Hour Summary Report. From: Mon Jan 3 , 1994 12 :00 a.m. To: Thu Jul 13 , 1995 12 :00 a.m. Time Number of CP Calls ---- --------------- 1:00 am 41 2:00 am 20 3:00 am 11 4:00 am 7 5:00 am 12 6:00 am 9 7:00 am 36 8:00 am 207 9:00 am 1327 10:00 am 2746 11:00 am 3334 12 noon 3546 1:00 pm 3544 2:00 pm 3746 3:00 pm 3914 4:00 pm 4075 5:00 pm 3957 6:00 pm 3081 7:00 pm 2099 8:00 pm 1379 9:00 pm 914 10:00 pm 520 11:00 pm 221 12 midnite 102 Peak Hour 4:00 pm Peak Hour # of calls 4075 Total completed Call Processing calls 38848 Total completed Voice Messaging calls 190466 Total blocked Call Processing calls 0 Total blocked Voice Messaging calls 0 Report Action: ? ======== Call Processing Report Menu ======== P - Path Activity Report R - Response Mailbox Activity Report B - Billing Information Report O - Outcalling Report A - Access by Hour Summary Report M - Clear Mailbox Statistics by Path S - Clear Summary Statistics F - Finished (return to main menu) Report Action: F As you can see Call Processing sets up boxes, removes boxes, and controls boxes in general. Im not going to explain every single command, it is easy enough to set up a box and learn this system, so figure it out yourself. ------------------------------------------------------------------------------ Exit Call Processing Menu (Y/N) ? Y Well this concludes this info file on Rolm PhoneMail systems. Hopefully the information herein will help you get setup making some boxes and save you some time from exploring the commands that wont get you anywhere. * this is for informational purposes only, dont blame 9x. * chill on #9x EFnet for real hp discussion only, no lamers.